Tipo B Hardware

With holes for water drain. Cutout: 145 mm Fixing holes Ø 5.5 mm

Combined ball corner and brace with stacking dimple cranked to suit 45mm lidmaker. (This corner is 2.5mm higher than the standard 4126) 1.5mm Steel...

Professional rack light with patented Smart Motion sensor technology Strip with 18 LEDs Timer control and adjustable sleep mode dimmer Continuous d...

PE foam "Plastazote" 33kg/m3 Sheet Size: 2000x1000mm Thickness: 20mm

PE foam "Plastazote" 33kg/m3 Sheet Size: 2000x1000mm Thickness: 20mm

Telescopic Support for use in elevating rear of 19" Mixers in rack top Load capacity: 25 kg Material steel Surface galvanized Length 160 - 235 mm H...

Estojo porta ferramentas - PVC preto com bolsas de nylon.

Speaker front foam Black Permits free passage of air Sheet Size: 200 x 150 cm Thickness: 25 mm

Removable case trolley. Three-stage extendable handle with locking button on handle. Tubes made of black aluminium, handle and mounting plates of p...

Recessed Pull-Out Handle Material: Steel & Plastic Closed Length: 495mm / 19.49" Handle Extends: 264.5mm / 10.41"

By mounting the pallet skids, cases without wheels can be moved with a pallet truckor a fork lift. Product type: Feet and Skids Material: aluminium...

Lockable Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case. Easy assembly - Drill or route a finger hole and a...

Briefcase Insert Black PVC Weight: 400 g Thickness: 15 mm

Net pocket with zip - Velcro (Hooks) on back enable removal of attachment from case lid.

Recessed Rigging Bar with Backplate Takes straps up to 54 mm wide Suitable for cabs with 14-22 mm wood thickness 3 mm Steel Black powder coated Bac...

75 mm skate wheel mounted in aluminium die cast housing in Flightcase design cranked for edge extrusions up to 35 mm. Safe load is 110 kg per pair ...

2-Leg system with steel mounting plates, incl. holding clamps to mount inside case lid. Length: adjustable from 750 mm to 780 mm Leg with 30 mm hei...

Material: Steel black powder coated Height: 73 - 118 cm continuously Diameter: 38 mm Fixing Holes: 5,1 mm Leg Thread: M10

Label holder - for 108 x 60 mm card. Steel, nickel plated. Weight: 20 g

Piano hinge. 1.3 mm Steel, zinc plated. 38 mm open, 1.83 m piece. Punched at 76 mm centres. Fixing holes: 5,1 mm Weight: 870 g

Self Adhesive Tour Label, white, laminated with protective clear foil surface. Can be easily cleaned and re-used without print fade. Dim. 290x190 m...

Recessed extendable handle. Black aluminium shafts in black plastic recessed dish. Three section: 39/22/25 cm.

Castor Plate to suit Heavy Duty Castors with 85.5mm x 106.5mm x 4mm / 3.37" x 4.19" x 3/16" top Plates, e.g. W0985/HD & W0990/HD. Retro Fit - ...